Against the background of low-carbon industrial development, electric forklifts have been widely adopted in warehousing, manufacturing logistics and other handling scenarios in recent years. Mastering scientific use and management rules can give full play to the advantages of this type of handling equipment, and create stable value for daily operation activities.

Core Pre-operation Inspection Specifications

Before each shift of operation, operators need to complete a full range of basic checks first, to eliminate potential hidden risks in advance. The inspection scope mainly includes the remaining power status of the power system, the sensitivity of the braking and steering structure, the wear degree of the fork and protective parts, the normal pressure state of the walking tires, and the smoothness of the warning lighting system. Any abnormal situation found in the inspection should be recorded and reported in time, and it is not suitable to start operation before the hidden trouble is resolved.

Standardized Daily Operation Principles

During the operation process, operators need to strictly control the load weight within the rated carrying range, and keep the load center within the specified safety distance, so as to avoid side tilt or unstable falling of goods. It is necessary to keep a low driving speed when passing narrow channels, turning or walking on wet and slippery ground, and give proper voice or light warning when meeting pedestrian areas. When the equipment is in a temporary idle state, the operating handle should be reset, and the power supply should be turned off for a long time of suspension, which can effectively reduce unnecessary energy consumption.

Routine Maintenance Management Guidelines

After the daily operation is over, the staff should clean up the dust, residual debris on the surface of the car body and the running parts in time, to avoid the hard objects entering the mechanical clearance and causing abnormal wear. The power battery should be charged and discharged in accordance with the corresponding operation specifications, to avoid long-term over-discharge or over-charge behavior. The lubrication maintenance of the rotating and moving connection parts should be carried out regularly, and the severely worn parts should be repaired or replaced in time, so as to extend the whole service cycle of the equipment and reduce the long-term operating cost. Reasonable use and scientific management of electric forklifts can not only effectively improve the safety level of on-site handling operations, but also match the development trend of green low-carbon logistics, bringing stable and reliable support for the daily operation of industrial and warehousing scenarios.