As a low-carbon, high-efficiency material handling solution, 4-wheel electric forklift is widely used in warehouse logistics, manufacturing plant cargo transfer and other scenarios, which features stable chassis, good load-bearing performance and low operation noise. For new operators, mastering standard operation procedures can effectively ensure work safety, extend equipment service life and reduce unnecessary maintenance costs.
First of all, you need to complete full pre-operation inspection before starting the equipment. Walk around the whole forklift to check the tire condition to confirm no obvious damage or abnormal wear, verify the flexibility of brake and steering system, check whether the forks have deformation or crack, confirm the power level of the battery meets the demand of planned operation tasks. Adjust the seat to a proper position that you can fully press the brake pedal, fasten the safety belt, and confirm no unrelated personnel or obstacles in the surrounding operation area.
Secondly, follow standard rules during the whole operation process. After turning on the power, test the response of forward and reverse gears, lifting and tilting function first at static state, make sure all control systems work normally before starting to drive. Keep driving at low speed in designated operation passages, avoid sharp turning at high speed, do not carry other people on the forklift, and never exceed the rated load capacity marked on the nameplate. When transporting goods, keep the forks 10 to 20 cm above the ground, and keep the mast tilted back properly to stabilize the goods. Do not adjust the mast or get off the forklift when the forks are lifted with loads.
.jpg)
For daily post-operation management, park the forklift in the designated parking area after completing work, put the forks flat on the ground, pull the handbrake tightly, and cut off the whole power supply in sequence. Arrange charging in time according to the remaining power, avoid running the battery out completely to affect its service life, and clean up the dust and sundries on the equipment surface regularly.
We are Jianshu New Energy, focusing on BYD electric forklifts. If you have any demands for 4-wheel electric forklift operation consultation and related supporting services, please send email to [email protected] for professional support.

